I Built a $3 Rubber Ducky

If you've ever watched a hacker movie and seen someone plug in a USB and own a machine in seconds — that's not Hollywood magic. That's a Rubber Ducky. And I built one for under ₹150. Here's exactly how I did it, what it taught me, and why every security student should build one. What Even Is a Rubber Ducky? A Rubber Ducky is a USB device that pretends to be a keyboard. The moment you plug it in, the operating system trusts it completely — because keyboards don't need driver approvals or admin permissions. Once trusted, it starts "typing" pre-programmed commands at superhuman speed. We're talking 1000 keystrokes per second. By the time you blink, it's already opened PowerShell, run a script, and closed the window. The original Hak5 Rubber Ducky costs around $80. I built mine for ₹150. What I Used DigiSpark ATtiny85 — ₹120–150 on Amazon India Arduino IDE — free A Windows test machine (my own laptop) 15 minutes That's it. No soldering. No special skills. Just a tiny microcontroller the size of a thumb. Setting It Up Step 1 — Install Arduino IDE Download from arduino.cc and install normally. Step 2 — Add DigiSpark Board Support Go to File → Preferences and paste this into Additional Board Manager URLs: http://digistump.com/package_digistump_index.json Then go to Tools → Board → Board Manager, search Digistump and install. Step 3 — Install Drivers DigiSpark needs Micronucleus drivers on Windows. Download from the official Digistump GitHub and run the installer. Step 4 — Write Your First Payload This opens Notepad and types a message — my first ever "attack": cpp#include "DigiKeyboard.h" void setup() { DigiKeyboard.delay(2000); DigiKeyboard.sendKeyStroke(KEY_R, MOD_GUI_LEFT); // Win+R DigiKeyboard.delay(500); DigiKeyboard.print("notepad"); DigiKeyboard.sendKeyStroke(KEY_ENTER); DigiKeyboard.delay(1000); DigiKeyboard.print("Hello. Your keyboard is now mine."); } void loop() {} Upload it, plug in the DigiSpark, and watch it type on its own. That moment hits different when y